Our First DIY (Do it Yourself) Fabric Bangle

Hello lovelies....Sorry my post is coming late.I just had to take my time. This post is not new to some people while some are seeing it for the first time but whichever way please do enjoy.

This picture below are the major tools you will need: a bangle, a fabric, UHU glue, scissors and a tape rule (not compulsory)

Then i measured like an inch abi na 1 inch of the fabric. That's enough for a bangle

Put a little UHU glue on the inner part of the bangle so it can hold down the fabric and ensure you cover the UHU glue after use

Pick up your fabric and fold the edge on one side like it is shown in the picture below so the other rough side is on the right after placing it on the bangle

Place the folded fabric on the inner part of the bangle where you had earlier put a bit of the UHU (please dont mind my oyinbo ooo, idea is need)

Start rolling the fabric round the bangle and the more you roll, ensure it is drawn tight to avoid it being loose.

Keep rolling

Keep rolling till you get to the last lap, then you will fold both edges so the rough edge is covered

Then bring out your UHU glue and put a bit on the inner part of the bangle, give it like 50 seconds to dry, then you can now place the fabric on it and press it down

Cut off the excess fabric

Your bangle is ready

I hope the pictures and captions are self explanatory?

SUPPLIES

NB---You can get plastic bangles at the market from those that sell costumes.

You can use any fabrics but ensure they ain't too hard or else, the UHU glue won't glue it.

UHU can be gotten from those that sell hats or household equipment like paint, padlocks, chains etc. Now You can be your own boss!

If anyone tries his/her hands on this, kindly send a picture lets see.